Evolving from our highly popular Micromodal Jersey, this long sleeve option is likewise made from Modal, a fabric derived from beech trees. Soft and comfortable, the Micromodal Long Sleeve offers up excellent moisture wicking and is cool to the touch, while a carbon thread knit into the fabric adds anti-microbial properties and strength. No zipper and a nod to soccer jersey styling give a low key feel, ideally geared for the next gravel adventure or coffee shop ride.
- Micromodal Carbon fabric, 120gsm and ultra-soft hand
- No zipper for ultra light weight, refined look and added comfort
- Stability panel behind pockets to prevent sagging
- Silicone gripper at waist for pocket stability
- UPF 30+
Composition:¬†86% Modal / 12% Elastane / 2% Carbon
Made in: Italy
Caring for your cycling gear properly will extend its life and maintain its performance, fit and quality. It‚Äôs important to consider these instructions carefully. While we stand behind the quality of our apparel, not adhering to these instructions will void our warranty against manufacturing & defects.
We strongly recommend washing your new gear before wearing it. You‚Äôll find that your apparel will soften, and fit & comfort will improve after washing - especially with bibs & shorts.
Machine wash cool, 86¬∞F (30¬∞C) with like colors: Cooler temps maintain better longevity for your apparel. Like colors, especially lights, will remain more vibrant when washed with like colors.
Use mild detergent. Do not bleach or dry clean: Strong detergents & bleach can break down the fibers and elastane in the garment, dramatically reducing its life.
Close all fastenings: this goes also for other garments mixed in with your cycling apparel. Velcro closures or clasps can catch on stitching or trim and damage your garments.
Lay flat to dry. Do not tumble dry: Do not put your cycling apparel in the dryer. Even on low heat. Don‚Äôt do it. Heat can damage fabric, elastic and heat transfer logos very easily. Lycra (Elastane) is used throughout our garments to provide compression and support and is susceptible to damage from heat and can irreparably damage your apparel.
How does the fit of your different jersey models compare?
Updated for 2020, our Signature jersey features more compression and support compared to previous years, but is less compressive fit compared to other models. Our SE is more compressive than the Signature in the sleeves, but will feel similar otherwise. The Ultralight is our most compressive and supportive fit. The Radiator Mesh jersey is similar to our Ultralight, but less compressive through the torso/stomach area given the Radiator fabric. The CONCEPT jersey is our most aerodynamic and race-fit jersey, and offers slightly less compression than the Ultralight. And the Micromodal is our least compressive, fitting like a slim-cut tee shirt. All of our jerseys are intended to be a tight/tailored fit to minimize extra material. This has several benefits, including muscle support, minimal chafing, and improved breathability and wicking.
What is the length and width of your jerseys?
Our jersey sizing is unique in that it is graded differently for every size. What this means is that we design each element of the jersey for every size. So every jersey will have slightly different measurements depending on the model and its intended fit. However, our jersey models are intended to fit the same in each size. That does vary though, given different fabrics have a different feel and elasticity, so the measurements aren't the same for each jersey we make. We highly recommend following our sizing chart or shopping at one of our retailers to find your preferred size and fit.